Alkyd primer GF-021 gray

Among the universal means for preliminary surface treatment, the GF-021 primer is one of the most popular. The primer is suitable for working with surfaces of materials such as ferrous metal, wood, plastic and others. The composition is applied as a layer for finishing with different enamels or as an independent coating. Carrying out repairs using the ground GF-021, it can be combined with the finish or putty. This mixture is suitable for surfaces exposed to weathering, as well as walls and ceilings indoors. Primer GF-021 is a universal compound used to prepare surfaces for painting or to protect materials from moisture and corrosion. In addition to universality, this composition has other advantages: · The main quality of the composition - it can be used for interior finishing and for the production of outdoor works. · Wide range of applications - the solution is suitable for priming surfaces of wood, metal, plastic, MDF, particle board, etc. · Anticorrosive properties - the primer is used to protect materials from rust before painting with enamels. · The primer improves the adhesive properties of the substrate, so that the connection of the materials to be stained will be reliable and durable. · Also during operation, the primer layer prevents peeling of the coating. · It determines the protection of surfaces from various effects of the atmosphere. · Withstands temperature fluctuations within -40 - + 40 ° C. Specifications Primer GF-021, the technical characteristics of which are preserved under the condition of proper conditions and duration of storage. If the mixture was in a room with a normal level of humidity, without direct exposure to sunlight and in its original packaging, it retains the following properties: · Conventional viscosity - 45 St (measured by viscometer B3-246 with a nozzle 4mm in diameter at 20 ° C; · The share of non-volatile particles - from 54% to 60%; · Drying time to III degree - 35 min (at 105 ° C), 24 hours (at t 20-22 ° C); · The degree of uniformity / grinding is not> 40 μm; · Coating strength - 50 cm (measured during the impact on the device type Y-1); · The elasticity of the dried layer during bending is not> 1 mm; · Coating density - from 1,25 kg / l to 1,3 kg / l; · Adhesion of the layer - not> 1 point; · Consumption for 1m2 - from 50 to 100 gr (for one layer); · Color - white, gray or reddish-brown; · Texture - matte, semi-glossy.