Impianto automatico per la misura della tangente dell'angolo di perdita dielettrica dell'olio isolante TANGENS-3M

TANGENT-3M is designed for measuring dielectric dissipation factor (tan δ) of insulating oil at industrial frequency (f = 50 Hz) in accordance to IEC 60247. AUTOMATED MEASUREMENT Fully automated cycle for measuring dielectric dissipation factor, including empty test cell calibration and oil sample heating, is carried out according to IEC 60247 specifications. REPLACEABLE TEST CELLS TANGENT-3M is supplied with three test cells as standard, however its non-volatile memory is capable of storing parameters for up to six different cells. STORING AND EXPORTING TEST RESULTS Up to 2000 test results can be stored in the memory of the device and exported to PC in MS Word or Excel formats. HIGH ACCURACY AND RATE OF MEASUREMENT In addition to the dielectric dissipation factor, TANGENT-3M measures the temperature, dielectric constant and electrical capacitance of an oil sample. Measurement duration according to the program "START 1", including test cell calibration and oil sample heating to 90 °С (with taking measurements at 70 and 90 °С), does not exceed 35 minutes. Measurement duration according to "START 2" program which in addition to test cell calibration and oil sample heating to 95 °С (with taking measurements at 70/80/90 °С) also includes the sample cooling (with taking measurements at 90/80/70 °С), does not exceed 85 minutes. DURABLE DESIGN The meter is made in the form of a single compact unit enclosed in a heat-resistant plastic casing and weighs only 5 kg. SAFETY High-voltage circuit of TANGENT-3 is protected against breakdowns, while the high voltage supply is immediately cut off whenever the test chamber lid gets opened.