Lifan 190F-B D25, motore 3A

The gasoline engine Lifan 190 F (coil 3A) is designed to be installed on motorcycles of various levels. The engine is well suited for installation on motorcycle towers (motodogs), snowmobiles, swamps, all-terrain vehicles, go-karts, boat motors, motor-pumps, generators and other all kinds of equipment. This model combines durability, economy with moderate cost and ease of use. Additionally equipped with a 3 Ampere coil, which allows you to connect useful electrical equipment with a capacity of up to 40 watts. This is a four-stroke single-cylinder internal combustion engine. The working volume of the cylinder is 420 cubic centimeters, the rated power reaches 11.6 horsepower, and the maximum can reach 15 horsepower. The diameter of the cylinder and the type of gas distribution mechanism make it possible to ensure the compact dimensions of the engine, it can be freely installed on many models of small agricultural machinery. As a fuel, this model uses the widely used motor gasoline brand AI-92, because the problems with the fuel will not arise. The crankshaft has a horizontal location, it also contributes to the small size, and also greatly simplifies the design and installation of the power unit on the chassis. Torque reaches 25 Nm at 3,600 revolutions per minute, while maintaining high stability and low consumption of gasoline. The capacity of the fuel tank is 6 liters, one refueling is enough for long continuous operation. As a lubricant, engine oil 10x30, 10x40, known and known to every motorist, is used. For each filling, no more than 1.1 liters is required. Transistor ignition system is easy to maintain and durable, it contributes to the stable operation of the engine under all conditions. The Lifan 190 F engine has a mass of 34 kilograms, it is a lightweight and compact unit, it is able to provide high productivity with minimal cost and loss. Its simple design will not create problems during installation or maintenance, the use of effective air cooling allows active use of the engine even in hot weather, a convenient starting cable ensures easy start of the engine. Advantages of the engine Lifan 190 F (DBG-15) 7A: Engine 4-stroke, single-cylinder, OHV, horizontal shaft, air cooling. Electronic ignition. Manual start system. Easy start decompression system. The thought-over design small weight and dimensions. The ability to connect payloads up to 40 watts. Specifications: Power, hp 15 Shaft position Horizontal Gasoline / Diesel Gasoline Bore, mm 90 Piston stroke, mm 66 Article 00250 Working volume, cm3 20 Compression ratio 8.2: 1 Maximum output power of 10.5 kW at 3600 rpm. in minutes Rated output power 8.5 kW at 3600 rpm. in minutes Torque 25 Nm at 2500 rpm in minutes Ignition system Contactless semiconductor Launch Manual Start Fuel consumption, g / kW * h 374 Engine oil volume, l 1.1 Lighting coil 3 amps Sizes, mm 465Х430Х505 Amount of packing, mm 485Х450Х525 Fuel tank capacity, l 6.5 The presence of gear No Diameter of shaft, mm 25 Weight (net), kg 33 Manufacturer LIFAN