Français
Nouveaux produits
La description
Universal enamel PF-115 MAY are designed to work on metal, wooden and other surfaces, operated in atmospheric conditions (exterior walls, façade elements of buildings, benches, fences) and within the premises (window frames, doors, doorways, window sills, etc.).
Caractéristiques
- Couleurs
- White, black, yellow, red, green, salad, blue, gray, brown, blue
- Des mesures de précaution
- Carry out painting work in a well-ventilated area. Use personal protective equipment for respiratory organs, eyes, skin.
- Enamel consumption for a single-layer coating
- 1 kg per 5-10 m2
- Coating resistance to static impact of water at a temperature of (20 ± 2) ° С, hour, not less
- 2
- Coating adhesion, points, no more
- 2
- Flexural elasticity of the film, mm, no more
- 2
- Strength of the coating upon impact on the device of the U-1 type, cm, not less
- 30
- Coating hardness according to the pendulum device of the TML type (pendulum A), relative units, not less
- 0,15
- Hiding power of the dried coating, g / m2, no more
- 100-250
- Flash point in a closed crucible, ºС (class 3, subclass 3.3)
- 23 or more, but less than 61
- Degré de broyage, micron, pas plus
- 50
- Nominal viscosity according to a viscometer of the VZ-246 type with a nozzle diameter of 4 mm at a temperature of (20.0 ± 0.5) С, s
- 140-220
- The gloss of the coating at an angle of illumination of 45 ° according to the device of the BF-5 type, units, not less
- 20
- Drying of each layer of enamel at a temperature of (20 ± 2) С
- 24 heures
- Mass fraction of non-volatile substances,%
- 50-80
- Note
- An increase in the relative viscosity of the enamel is allowed during storage, if the enamel, when diluted with a solvent to the viscosity specified in paragraph 4, meets the requirements and values of these technical requirements.
- Structure
- alkyd varnish, pigments, targeted additives, solvents, desiccant
